Product Description
BANDO 749.5-16.5-28 CVT DRIVE BELT – MADE IN JAPAN – TGB 50cc / ADIVA / SCOOTER
Upgrade or replace your worn CVT belt with a genuine Bando 749.5-16.5-28 Drive Belt. Bando is one of the most recognized manufacturers of CVT and power-transmission belts worldwide and has supplied belts for original-equipment applications for decades.
Manufactured in Japan, this belt is designed to provide consistent power transfer, dependable grip, reduced slipping, and long service life when properly installed in a compatible CVT system.
This size is commonly associated with a variety of TGB 50cc scooters and the Adiva 50 HiPer 5. It may also be used as a close replacement size for certain Honda Aero 80 applications; however, Honda Aero 80 owners should carefully compare the dimensions of their original belt before ordering.
BELT SPECIFICATIONS
-
Brand: Bando
-
Belt Type: CVT / Automatic Scooter Drive Belt
-
Belt Size: 749.5-16.5-28
-
Nominal Length: 749.5mm
-
Top Width: 16.5mm
-
Belt Angle: 28°
-
Construction: Reinforced CVT V-Belt
-
Country of Manufacture: Japan
-
Application: Automatic CVT transmissions
COMMON FITMENT
TGB 50cc MODELS
Commonly used on compatible versions of:
-
TGB Akros Tec
-
TGB Delivery
-
TGB Key West
-
TGB BM1
-
TGB 101R
-
TGB BH1C
-
TGB BR1D
-
TGB 303R
-
TGB RS
-
TGB BT
-
TGB QT
-
TGB Cobra
-
TGB Laser
-
TGB Jet Fighter
-
TGB Sunset
-
TGB 101S
ADIVA
-
Adiva 50 HiPer 5
HONDA AERO 80
This 749.5-16.5-28 belt may be used as a CLOSE AVAILABLE SIZE for certain Honda Aero 80 applications.
IMPORTANT: Because this may not be the exact original Honda belt dimension, compare your existing belt measurements and/or original belt number before purchasing.
WHY CHOOSE A BANDO BELT?
Bando is a long-established Japanese manufacturer of automotive, motorcycle, scooter, industrial, and power-transmission belts.
A quality CVT belt is especially important because it transfers engine power between the variator and rear driven pulley. An incorrectly sized, badly worn, or low-quality belt can negatively affect acceleration, top speed, CVT operation, and overall reliability.
Bando belts are designed for:
-
Smooth power transfer
-
Consistent CVT operation
-
Reliable grip under acceleration
-
Resistance to heat and flexing
-
Reduced belt slippage
-
Long service life when properly installed
-
Consistent belt dimensions
WHEN SHOULD A CVT BELT BE REPLACED?
Consider replacing your belt if you notice:
-
Cracks in the belt
-
Fraying along the edges
-
Missing or damaged belt material
-
Belt width below the service limit
-
Excessive slipping
-
Poor acceleration
-
Engine RPM increasing without a corresponding increase in speed
-
Unusual CVT noise
-
Belt contamination from oil or grease
-
Unknown belt age on an older scooter
A worn belt can become narrower over time, changing how high or low it rides in the CVT pulleys and potentially affecting both acceleration and maximum speed.
IMPORTANT FITMENT INFORMATION
DO NOT PURCHASE A CVT BELT BASED ONLY ON ENGINE SIZE OR SCOOTER MODEL.
Manufacturers sometimes used different CVT components or belt sizes on different production years and versions of the same scooter.
BEFORE ORDERING:
Compare the number printed on your old belt whenever possible.
The most important dimensions for this belt are:
749.5mm LENGTH
16.5mm WIDTH
28° ANGLE
If your existing belt has a different number, width, or length, verify compatibility before ordering.
INSTALLATION NOTES
For best results:
-
Inspect the variator and rear pulley before installation.
-
Clean belt-contact surfaces if necessary.
-
Do not apply oil or grease to the belt or pulley faces.
-
Make sure the belt is properly seated before tightening the variator.
-
Inspect variator rollers, guides, clutch, and pulley components while the CVT cover is removed.
-
Rotate the CVT by hand after installation to confirm proper belt positioning.
A new belt may require a short break-in period before reaching its normal operating characteristics.
PACKAGE INCLUDES
-
1 × Bando 749.5-16.5-28 CVT Drive Belt
BRAND: BANDO
SIZE: 749.5-16.5-28
MADE IN JAPAN
PLEASE MATCH YOUR ORIGINAL BELT NUMBER AND DIMENSIONS BEFORE ORDERING. FITMENT LISTS ARE PROVIDED AS A REFERENCE, AS SOME MODELS MAY USE DIFFERENT CVT COMPONENTS DEPENDING ON YEAR OR PRODUCTION VERSION.
